Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

To perform this operation, disconnect the battery terminals to protect any delicate circuits. Then, release the bonnet from the appropriate lever and lift it, securing it with the prop rod. Once these steps are completed, move to the rear of your vehicle.

Use a flathead screwdriver to release the slot for the bulb, allowing you to disconnect the connector at the back. Now, simply remove the bulb and replace it with the new one. Finally, retrace the steps described for reassembly, and you're done!


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Change the Number Plate Lights on the Fiat Grande Punto
How to Change the Number Plate Lights on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This brief and simple guide shows you how to remove and replace the number plate bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, mov…
How to Replace the Number Plate Light on a Fiat Grande Punto
How to Replace the Number Plate Light on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to replace the damaged bulb located above the number plate on a Fiat Grande Punto? Use a screwdriver or plastic lever to remove the number plate …
Replacing the Number Plate Lights on the Fiat Panda
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you how to remove and replace the number plate lights on the Fiat Punto Evo, as well as the Grande Punto. First, move to the rea…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos