Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Bronco Sport
    4. : Service warning light

Ford Bronco Sport - Service warning light

Service Warning Light Ford Bronco Sport (2021-2028 / cx 430)

Ford Bronco Sport (2021-2026 / Cx430)
How to Reset the Oil Light on the Ford Bronco Sport
To manually reset the oil light on your Ford Bronco Sport, follow the steps outlined in this guide. Fortunately, the procedure is very simple and takes only a …Read all…
Posted on 6 April 2026 by ScegliAuto
Ford Bronco Sport (2021-2026 / Cx430)
How to Reset the Oil Light on a 2021 Ford Bronco Sport
If you have just changed the engine oil in your new 2021 Ford Bronco but the warning light keeps coming on, you need to perform the following manual reset. …Read all…
Posted on 25 September 2026 by ScegliAuto
Ford Bronco Sport (2021-2026 / Cx430)
How to Reset the Oil Light on the Ford Bronco Sport?
You can reset the oil light after performing a complete engine oil change, including the oil filter and its gasket. To reset the oil light on the Ford Bronco …Read all…
Posted on 20 July 2026 by ScegliAuto
Ford Bronco Sport (2021-2026 / Cx430)
How to Reset the Oil Light on the Ford Bronco Sport
If you have just changed the oil and the respective filter in your new Ford Bronco Sport, you must reset the oil warning light to prevent it from turning on at …Read all…
Posted on 15 July 2026 by ScegliAuto
Car stereo (1) Battery (1) Key (4) Dashboard (1) Tail light (1) Air filter (1) Cabin air filter (2) Accessory kit (1) Engine oil (4) Door trim panel (1) Front bumper (1) Wheel (1) Fuse box (4) Warning light – error code (1) Service warning light (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos