Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Ford Bronco Sport

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Service warning light

If you have just changed the oil and the respective filter in your new Ford Bronco Sport, you must reset the oil warning light to prevent it from turning on at every start. To do this, follow the procedure below. First, turn on the vehicle's instrument cluster, then press the "Menu" button located on the right side of the steering wheel. Scroll down using the directional arrows and select the "Oil Life" option. Immediately after, select "Reset oil life" and hold the "OK" button until the reset is complete.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Ford Bronco Sport?
How to Reset the Oil Light on the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) You can reset the oil light after performing a complete engine oil change, including the oil filter and its gasket. To reset the oil light on the For…
How to Reset the Oil Light on the Ford Bronco Sport
How to Reset the Oil Light on the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) To manually reset the oil light on your Ford Bronco Sport, follow the steps outlined in this guide. Fortunately, the procedure is very simple and tak…
How to Replace Oil and Filter on the Ford Bronco Sport?
How to Replace Oil and Filter on the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) The video explains in detail how to replace the engine oil and oil filter in the Ford Bronco Sport. Due to the vehicle's ground clearance, there is n…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos