Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L

Model: Ford Bronco Sport Cx430 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

Video tutorial

Let's discover the procedure to perform the routine maintenance service by replacing the engine oil and oil filter of the Ford Bronco Sport 1.5L. First, lift the vehicle and start removing the plastic shield located under the engine by unscrewing the screws; then, unscrew the oil drain bolt found on the oil pan, allowing the old oil to drain into a container for about ten minutes.

At this point, using the appropriate wrench, unscrew the oil filter cartridge and replace it with a new one; finally, pour in the new oil!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace Oil and Filter on the Ford Bronco Sport?
How to Replace Oil and Filter on the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) The video explains in detail how to replace the engine oil and oil filter in the Ford Bronco Sport. Due to the vehicle's ground clearance, there is n…
Engine Oil and Oil Filter Replacement for the Ford Bronco Sport
Engine Oil and Oil Filter Replacement for the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) Let's go through this guide on how to replace the engine oil and oil filter of the Ford Bronco Sport in simple and quick steps. First, lift the vehic…
How to Reset the Oil Light on the Ford Bronco Sport?
How to Reset the Oil Light on the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) You can reset the oil light after performing a complete engine oil change, including the oil filter and its gasket. To reset the oil light on the For…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos