Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Oil and Filter on the Ford Bronco Sport?

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Engine oil

The video explains in detail how to replace the engine oil and oil filter in the Ford Bronco Sport. Due to the vehicle's ground clearance, there is no need for jack stands or lifting it, as there is already ample space to work underneath. Gather all necessary materials before starting, then open the oil pan by unscrewing the bolt. Allow all the old oil to drain before closing it. Meanwhile, unscrew the oil filter and install the new one after filling it with clean engine oil and lubricating the gasket. Finally, add the new oil to the system.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L
How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L
Ford Bronco Sport (2021-2026 / Cx430) Let's discover the procedure to perform the routine maintenance service by replacing the engine oil and oil filter of the Ford Bronco Sport 1.5L. Fir…
Replace the Cabin Air Filter in the Ford Bronco Sport
Replace the Cabin Air Filter in the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) This guide shows you how to remove and replace the cabin air filter in the Ford Bronco Sport. First, get inside the vehicle and open the glove compar…
Engine Oil and Oil Filter Replacement for the Ford Bronco Sport
Engine Oil and Oil Filter Replacement for the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) Let's go through this guide on how to replace the engine oil and oil filter of the Ford Bronco Sport in simple and quick steps. First, lift the vehic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos