Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the Ford Bronco Sport

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Engine oil

Let's go through this guide on how to replace the engine oil and oil filter of the Ford Bronco Sport in simple and quick steps. First, lift the vehicle and start unscrewing the screws of the lower engine panel to remove it; then unscrew the oil drain plug, allowing it to drain into a container for about ten minutes. At this point, unscrew the oil filter using the appropriate wrench; then replace the oil filter cartridge, hand-tightening it and gently securing it, while pouring in the new engine oil!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Ford Bronco Sport?
How to Reset the Oil Light on the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) You can reset the oil light after performing a complete engine oil change, including the oil filter and its gasket. To reset the oil light on the For…
How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L
How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L
Ford Bronco Sport (2021-2026 / Cx430) Let's discover the procedure to perform the routine maintenance service by replacing the engine oil and oil filter of the Ford Bronco Sport 1.5L. Fir…
How to Reset the Oil Light on the Ford Bronco Sport
How to Reset the Oil Light on the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) To manually reset the oil light on your Ford Bronco Sport, follow the steps outlined in this guide. Fortunately, the procedure is very simple and tak…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos