Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Ford Bronco Sport

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Engine oil

If you want to tackle the engine oil and oil filter replacement on this vehicle by yourself, the description below and the video will provide the instructions on how to proceed. After opening the hood and lifting the vehicle, proceed to unscrew the drain plug in the oil pan and locate the oil filter, then use the appropriate wrench to unscrew it. Next, take the new filter and screw it on after lubricating the gasket. Once all the used oil has drained out, proceed to close the drain plug. Go back to the engine compartment to fill the system with new oil.

Updated on 25 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L
How to Replace the Engine Oil and Oil Filter of the Ford Bronco Sport 1.5L
Ford Bronco Sport (2021-2026 / Cx430) Let's discover the procedure to perform the routine maintenance service by replacing the engine oil and oil filter of the Ford Bronco Sport 1.5L. Fir…
How to Replace Oil and Filter on the Ford Bronco Sport?
How to Replace Oil and Filter on the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) The video explains in detail how to replace the engine oil and oil filter in the Ford Bronco Sport. Due to the vehicle's ground clearance, there is n…
Engine Oil and Oil Filter Replacement for the Ford Bronco Sport
Engine Oil and Oil Filter Replacement for the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) Let's go through this guide on how to replace the engine oil and oil filter of the Ford Bronco Sport in simple and quick steps. First, lift the vehic…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos