Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : Center console tunnel

Ford Escape - Center console tunnel

Center Console Tunnel Ford Escape (2013-2019 / mk 3)

Ford Escape (2013-2019 / MK 3)
Disassembly of the central tunnel of the Ford Escape
Today's video will show us how to disassemble and replace the center console of the Ford Escape, as well as the Ford Kuga, in simple steps. First, we get into …Read all…
Posted on 1 August 2024 by ScegliAuto
Dent (1) Car stereo (8) Battery (18) Control arm (1) Spark plugs (1) Body (2) Key (21) Trunk lock (1) Timing belt (2) Onboard computer (4) Checks and maintenance (12) Throttle body (1) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (4) Tail light (7) Fog lights (5) Air filter (4) Cabin air filter (8) Fuel filter (1) Oil filter (1) Grille (1) Light bulb (3) Headlight bulb (7) Tail light bulb (5) Interior dome light bulb (1) Antifreeze coolant (2) (3) Handle (2) Starter motor (1) Engine oil (5) Clock (9) Door trim panel (12) Front bumper (4) Rear bumper (2) Brake pads (2) Tires (1) Shift knob (1) Fuel pump (5) Car door (2) Instrument cluster (2) Wheel (3) Fuse box (30) Seat (2) Door lock (2) Oxygen sensor (1) Suspension system (1) Side mirror (3) Warning light – error code (14) (4) Tire pressure warning light (4) Service warning light (38) Engine mount (1) Fuel cap (2) Windshield wipers (4) Thermostat (1) Drivetrain (1) Center console tunnel (1) Valve (1) EGR valve (2) Blower motor (2) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos