Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : EGR valve

Ford Escape - EGR valve

EGR Valve Ford Escape (2001-2007 / mk 1)

Ford Escape (2001-2007 / MK 1)
How to disassemble the EGR valve in the Ford Escape?
In this tutorial we can see how to disassemble the EGR valve in the Ford Escape, an extremely simple and quick operation. First of all, make sure that the …Read all…
Posted on 15 April 2025 by ScegliAuto
Ford Escape (2001-2007 / MK 1)
How to Remove the EGR Valve on a Ford Escape?
In this tutorial, you will see how to replace the EGR valve on a Ford Escape, a very simple and quick operation. First, wait for the engine to be completely …Read all…
Posted on 3 November 2026 by ScegliAuto
Dent (1) Car stereo (8) Battery (18) Control arm (1) Spark plugs (1) Body (3) Key (21) Trunk lock (1) Timing belt (2) Onboard computer (4) Checks and maintenance (12) Throttle body (1) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (4) Tail light (7) Fog lights (5) Air filter (4) Cabin air filter (8) Fuel filter (1) Oil filter (1) Grille (1) Light bulb (3) Side marker bulb (1) Headlight bulb (7) Tail light bulb (5) Interior dome light bulb (1) Antifreeze coolant (2) (3) Handle (2) Starter motor (1) Engine oil (5) Clock (9) Door trim panel (12) Front bumper (4) Rear bumper (2) Brake pads (2) Tires (1) Shift knob (1) Fuel pump (5) Car door (2) Instrument cluster (2) Wheel (4) Fuse box (31) Seat (2) Door lock (2) Oxygen sensor (1) Suspension system (1) Side mirror (3) Warning light – error code (14) Tire pressure warning light (8) Service warning light (38) Engine mount (1) Fuel cap (2) Windshield wipers (5) Thermostat (1) Drivetrain (1) Center console tunnel (1) Valve (1) EGR valve (2) Blower motor (2) Side window (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos