Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : Trunk lock

Ford Escape - Trunk lock

Trunk Lock Ford Escape (2013-2019 / mk 3)

Ford Escape (2013-2019 / MK 3)
How to open the rear hatch of the Ford Escape from the inside.
In this guide, we will see the instructions that will allow us to open the rear hatch of the Ford Escape from the inside, thus unlocking the closure. First, we …Read all…
Posted on 7 January 2026 by ScegliAuto
Dent (1) Car stereo (8) Battery (18) Control arm (1) Spark plugs (1) Body (2) Key (21) Trunk lock (1) Timing belt (2) Onboard computer (4) Checks and maintenance (12) Throttle body (1) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (4) Tail light (7) Fog lights (5) Air filter (4) Cabin air filter (8) Fuel filter (1) Oil filter (1) Grille (1) Light bulb (3) Headlight bulb (7) Tail light bulb (5) Interior dome light bulb (1) Antifreeze coolant (2) (3) Handle (2) Starter motor (1) Engine oil (5) Clock (9) Door trim panel (12) Front bumper (4) Rear bumper (2) Brake pads (2) Tires (1) Shift knob (1) Fuel pump (5) Car door (2) Instrument cluster (2) Wheel (3) Fuse box (30) Seat (2) Door lock (2) Oxygen sensor (1) Suspension system (1) Side mirror (3) Warning light – error code (14) (4) Tire pressure warning light (4) Service warning light (38) Engine mount (1) Fuel cap (2) Windshield wipers (4) Thermostat (1) Drivetrain (1) Center console tunnel (1) Valve (1) EGR valve (2) Blower motor (2) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos