Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ford Edge
    4. : Manufacturer emblem

Ford Edge - Manufacturer emblem

Manufacturer Emblem Ford Edge (2006-2014 / u 387, mk 1)

Ford Edge (2006-2014 / U387, MK 1)
How to Replace the Ford Badge on the Ford Edge
In this guide, you will find instructions to remove and replace the manufacturer badge on the Ford Edge. First, move to the front of the vehicle and start …Read all…
Posted on 21 July 2026 by ScegliAuto
Ford Edge (2006-2014 / U387, MK 1)
How to Replace the Ford Badge on the Front of a Ford Edge
In this guide, let’s look at the steps to remove and replace the front manufacturer badge on a Ford Edge. First, open the bonnet of your car and start …Read all…
Posted on 17 August 2026 by ScegliAuto
Air conditioning (1) Car stereo (2) Battery (2) Control arm (1) Key (14) Trunk lock (2) Air conditioner (5) A/C controls (1) Checks and maintenance (7) Air filter (1) Cabin air filter (4) Headlight bulb (5) Tail light bulb (1) License plate light (3) Engine oil (1) Clock (4) Door trim panel (4) Rear bumper (1) Shift knob (1) Fuse box (25) Door lock (1) AdBlue warning light (1) Warning light – error code (10) (2) Tire pressure warning light (2) Service warning light (8) Manufacturer emblem (2) Fuel cap (1) Windshield wipers (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos