Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ford Badge on the Front of a Ford Edge

Model: Ford Edge MK 1, U387 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Manufacturer emblem

See other generations:
Video tutorial

In this guide, let’s look at the steps to remove and replace the front manufacturer badge on a Ford Edge. First, open the bonnet of your car and start unscrewing the fixing screws of the plastic panel located above the bumper to remove it. Then, unscrew the fixing nuts of the manufacturer badge to remove it from the outside, as shown in the video.

At this point, install the new logo, securing it properly with the nuts; then reassemble it onto the bumper grille, following the video tutorial to the end!


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Ford Badge on the Ford Edge
How to Replace the Ford Badge on the Ford Edge
Ford Edge (2006-2014 / MK 1, U387) In this guide, you will find instructions to remove and replace the manufacturer badge on the Ford Edge. First, move to the front of the vehicle and …
Where is the Fuse Box on the 2017 Ford Edge?
Where is the Fuse Box on the 2017 Ford Edge?
Ford Edge (2015-2024 / MK 2, Cd539) If you want to independently locate the fuse box on your second generation Ford Edge (2017), just follow the steps described in this mini guide. Firs…
Where is the Horn Located in the Ford Edge?
Where is the Horn Located in the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) This tutorial shows where the horn is located in the Ford Edge and how to proceed if you need to replace it, a very simple and quick operation. As sh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos