Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ford Badge on the Ford Edge

Model: Ford Edge U387, MK 1 - Years 2006-2014
Part: Manufacturer emblem

In this guide, you will find instructions to remove and replace the manufacturer badge on the Ford Edge. First, move to the front of the vehicle and start prying on the side of the badge, which is fixed to the front bumper grille; once removed, clean the area properly where the new badge will be applied. At this point, wait for the adhesive to set correctly, applying the badge to the support; similarly, replace the rear manufacturer badge if necessary.

Posted on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Ford Badge on the Front of a Ford Edge
How to Replace the Ford Badge on the Front of a Ford Edge
Ford Edge (2006-2014 / U387, MK 1) In this guide, let’s look at the steps to remove and replace the front manufacturer badge on a Ford Edge. First, open the bonnet of your car and star…
How to Replace the Remote Battery of the Ford Edge?
How to Replace the Remote Battery of the Ford Edge?
Ford Edge (2006-2014 / U387, MK 1) To replace the battery of the Ford Edge remote, slide the lever on the back of the device to remove the key from the top. Once removed, lever inside …
How to Replace the Key Fob Battery on the Ford Edge?
How to Replace the Key Fob Battery on the Ford Edge?
Ford Edge (2006-2014 / U387, MK 1) To replace the battery in the key fob of the Ford Edge, leverage inside the groove that divides the two halves of the fob, on the side opposite to wh…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos