Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ford Fusion North America -

Ford Fusion North America (2006-2012 / mk 1)

Ford Fusion North America (2006-2012 / MK 1)
How do you reset the tire pressure warning light on a Ford Fusion?
The tire pressure warning light displayed on the instrument panel of the Ford Fusion can be reset by first inflating the tires to the recommended pressure …Read all…
Posted on 22 December 2025 by ScegliAuto
Ford Fusion North America (2006-2012 / MK 1)
How to reset the TPMS light on the Ford Fusion
The TPMS warning light reset on a 2012 Ford Fusion must be done using a tire pressure scanner. Turn on the ignition and enter the reset mode by pressing the …Read all…
Posted on 16 June 2025 by ScegliAuto
Ford Fusion North America (2006-2012 / MK 1)
How to reset the tire pressure light in the Ford Fusion?
In this tutorial we can see how to reset the tire pressure light in the Ford Fusion, a very simple and quick operation, to be done only once the correct …Read all…
Posted on 8 January 2025 by ScegliAuto
Shocks (1) Car stereo (2) Battery (2) Transmission (2) Key (10) Checks and maintenance (8) Headlight (2) Tail light (3) Air filter (2) Cabin air filter (2) Headlight bulb (3) License plate light (2) Handle (1) Engine oil (1) Clock (3) Door trim panel (2) Front bumper (2) Rear bumper (1) Shift knob (2) Fuel pump (2) Power window switch (1) Instrument cluster (1) Wheel (1) Fuse box (19) Seat (1) Parking sensors (1) Side mirror (2) Warning light – error code (5) (3) Tire pressure warning light (2) Service warning light (11) Fuel cap (3) Blower motor (2) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos