Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ka
    4. : Alternator

Ford Ka - Alternator

Alternator Ford Ka (1996-2008 / mk 1)

Ford Ka (1996-2008 / MK 1)
How to Replace the Alternator on a Ford Ka
Before you can start, open the front bonnet of your Ford Ka. Begin by loosening the tensioner of the auxiliary belt, then remove the belt itself that is …Read all…
Posted on 6 May 2026 by ScegliAuto
Ford Ka (1996-2008 / MK 1)
How to Remove the Alternator from a Ford Ka
Learn how to remove the alternator from a Ford Ka. Pull the lever located at the bottom left of the steering wheel and lift the bonnet (secure it). Locate the …Read all…
Posted on 27 March 2026 by ScegliAuto
Airbag (5) Alternator (2) Antenna (2) Air conditioning (1) Car stereo (17) Anti-roll bar (1) Battery (3) Ignition coil (1) Bushings (1) Spark plugs (1) Body (5) Key (4) Timing belt (6) V-belt (1) Onboard computer (5) Checks and maintenance (8) Dashboard (6) Brake rotors (1) Headlight (13) Tail light (4) Air filter (2) Cabin air filter (8) Fuel filter (2) Light bulb (2) Headlight bulb (10) Tail light bulb (4) Instrument panel light (1) License plate light (3) Handle (1) Starter motor (1) Engine oil (3) Clock (17) Door trim panel (7) Front bumper (1) Rear bumper (1) Shift knob (4) Fuel pump (1) Car door (1) Instrument cluster (2) Radiator (2) Heater core (2) Heater control valve (2) Wheel (3) Fuse box (34) Seat (3) Side mirror (3) Warning light – error code (4) (9) Tire pressure warning light (4) Service warning light (20) Brake drums and shoes (1) Fuel cap (2) Thermostat (3) Cylinder head (1) Valve (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos