Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : 1965-1973 (MK 1)

Ford Mustang Years 1965-1973 (MK 1)

Ford Mustang (1965-1973 / MK 1)
How to change the Ford Mustang engine oil
Let's see in this guide the main steps that will allow us to replace the engine oil and the oil filter, performing the regular routine maintenance service of …read all…
Posted on 11 November 2022 by ScegliAuto
Loudspeaker (1) Air conditioning (1) Car stereo (1) Gearbox (1) Bodywork (1) Key (7) -board computer (1) Checks and maintenance (2) Dashboard (1) Air filter (2) Cabin air filter (1) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (1) Handle (1) Starter motor (2) Engine oil (3) Front bumper (1) Rear bumper (1) Tires (1) Pump (1) Instrument cluster (3) Fuse box (5) Seat (1) Drive shaft (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos