Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : Starter motor

Ford Mustang - Starter motor

Ford Mustang (2005-2014 / MK 5, S197)
Replacing the starter motor
The starter motor is essential because it allows you to start the engine of your car. It can be replaced without necessarily using the help of a mechanic. To …read all…
Posted on 30 July 2023 by ScegliAuto
Ford Mustang (2005-2014 / MK 5, S197)
Starter motor replacement
Before proceeding with the removal of the starter motor, disconnect the negative pole of the battery. The starter motor is located in the lower part of the …read all…
Posted on 28 July 2023 by ScegliAuto
Loudspeaker (1) Air conditioning (1) Car stereo (1) Gearbox (1) Bodywork (1) Key (7) -board computer (1) Checks and maintenance (2) Dashboard (1) Air filter (2) Cabin air filter (1) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (1) Handle (1) Starter motor (2) Engine oil (3) Front bumper (1) Rear bumper (1) Tires (1) Pump (1) Instrument cluster (3) Fuse box (5) Seat (1) Drive shaft (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos