Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : Checks and maintenance

Ford Mustang - Checks and maintenance

Checks And Maintenance Ford Mustang (2015-2023 / mk 6, s 550)

Ford Mustang (2015-2023 / MK 6, S550)
How to Replace the Sun Visor on a Ford Mustang
To replace the sun visor on a Ford Mustang, use a tool like a screwdriver to pry off the panel covering the side support of the visor: once this panel is …Read all…
Posted on 1 February 2026 by ScegliAuto
Ford Mustang (2015-2023 / MK 6, S550)
How to deactivate the seat belt alarm on a Ford vehicle
Let's see how it is possible to deactivate the seatbelt chime on this Ford Mustang: the system is identical on most Ford vehicles. We turn on the instrument …Read all…
Posted on 27 May 2025 by ScegliAuto
Ford Mustang (2015-2023 / MK 6, S550)
Maintenance reset on a Ford Mustang
In this very useful video tutorial today you will be able to see the whole operation step by step to reset the maintenance light on a Ford Mustang, sixth …Read all…
Posted on 8 October 2024 by ScegliAuto
Speaker (1) Air conditioning (1) Car stereo (1) Transmission (3) Body (1) Key (13) Onboard computer (1) Checks and maintenance (3) Dashboard (1) Shifter boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Fuel filter (1) Oil filter (1) Clutch (1) Accessory kit (1) Tail light bulb (2) Handle (1) Starter motor (2) Engine oil (2) Clock (1) Front bumper (2) Rear bumper (1) Shift knob (1) Pump (1) Car door (1) Fuse box (11) Seat (2) Axle shaft (1) Rearview mirror (1) Warning light – error code (3) (2) Tire pressure warning light (1) Service warning light (8)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos