Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : Drive shaft

Ford Mustang - Drive shaft

Ford Mustang (2005-2014 / MK 5, S197)
How to remove and check the drive shaft
This video explains how to remove the drive shaft from a Ford Mustang. In the video, the disassembly operations of the wheel have already been carried out, …read all…
Posted on 27 July 2023 by ScegliAuto
Loudspeaker (1) Air conditioning (1) Car stereo (1) Gearbox (1) Bodywork (1) Key (7) -board computer (1) Checks and maintenance (2) Dashboard (1) Air filter (2) Cabin air filter (1) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (1) Handle (1) Starter motor (2) Engine oil (3) Front bumper (1) Rear bumper (1) Tires (1) Pump (1) Instrument cluster (3) Fuse box (5) Seat (1) Drive shaft (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos