Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : How to change the Ford Mustang engine oil

Ford Mustang - Video tutorial

Model: Ford Mustang MK 1 - Years 1965-1973
Part: Engine oil
Operation: How to change the Ford Mustang engine oil

Let's see in this guide the main steps that will allow us to replace the engine oil and the oil filter, performing the regular routine maintenance service of the Ford Mustang. First of all, we lift the car and begin to open the tap located on the engine oil sump, letting the old oil drain into a container for about ten minutes; then we go to unscrew and remove the oil filter cartridge, using the special wrench, as shown in the video. At this point we unscrew the filler cap and pour in the new engine oil, the right type for our engine!


Posted on 11 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos