Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Demonstration of Oil and Filter Change

Model: Ford Mustang S197, MK 5 - Years 2005-2014
Part: Engine oil

By closely watching the video, you will understand the main steps for changing the oil and filter. To carry out this task, you will need to access underneath the vehicle, always following safety regulations. Start by unscrewing the bolt from the oil sump to drain the used oil into a suitable container. Once all the oil has drained, re-tighten the bolt. Get a piece of cardboard, place it around the filter, and unscrew it. Always compare the removed part with the replacement. Apply a bit of oil to the seal of the new filter and screw it on by hand. Now, all that's left is to add the oil. Pour in some oil and check the level on the dipstick. Run the engine for a few minutes and recheck the level, adding more oil if necessary. Car model: Ford Mustang V8 Year: 2005-2010.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on Ford Mustang?
How to Reset the Oil Light on Ford Mustang?
Ford Mustang (2015-2023 / MK 6, S550) To reset the oil light on the Ford GT, use the buttons on the right side of the steering wheel to navigate through the onboard computer menu. Once in…
How to Change the Engine Oil on the Ford Mustang
How to Change the Engine Oil on the Ford Mustang
Ford Mustang (1965-1973 / MK 1) This guide will show you the main steps to perform an engine oil and oil filter change, carrying out the regular maintenance service on the Ford Must…
Oil and Filter Change
Oil and Filter Change
Ford Mustang (2005-2014 / S197, MK 5) In this tutorial, the filter is replaced and the oil is changed on a Ford Mustang. Use a socket spanner to unscrew the oil sump plug located under th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos