Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight bulb

Release the bonnet from the appropriate lever to lift and secure it with the support rod, then unscrew the bolts that secure the headlight you need to work on; the positions of the bolts are indicated in the video, as well as the panel under the headlight, allowing you to unclip and remove it without issues. Now you can disconnect the connector at the back to work more comfortably; replace the necessary bulbs by removing the protective cover and you're done! Retrace the described steps in reverse for reassembling the various components.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
Replacement of the front headlight bulb of the Ford Kuga
Replacement of the front headlight bulb of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) If the front headlight bulb of the Ford Kuga burns out, for our safety it must be replaced as soon as possible. We open the hood of the engine compar…
How to replace the front headlight bulb of the Ford Kuga 2
How to replace the front headlight bulb of the Ford Kuga 2
Ford Kuga (2012-2019 / C520, MK 2) One of the main causes of the headlight not working on a Ford Kuga vehicle is a blown bulb, in these cases replacement is necessary. To replace the b…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos