Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear turn signal bulbs of the Ford Kuga 2

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Side marker bulb

The steps to replace the side turn signal bulbs of the Ford Kuga 2 are: - open the trunk; - remove the screw protection caps; - unscrew the two screws holding the headlight in place; - remove the headlight from its housing; - disconnect the connector; With the headlight in your hands, use a small flat-head screwdriver to open the light fixture in order to remove the bulb. Insert a new bulb and follow the process in reverse to mount the headlight back into its housing. For the replacement of the bulbs on the left headlight, follow the same steps.

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the side indicator bulbs of the Ford Kuga
How to replace the side indicator bulbs of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the bulbs for the side indicators of the Ford Kuga model 2 is an easy and quick operation to do independently. We start by removing the cov…
How to activate the fog lights in the Ford Kuga?
How to activate the fog lights in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, we can see how to activate the fog lights in the Ford Kuga, a very simple and quick operation. These lights should obviously only b…
How to Remove the Front Headlight on a Ford Kuga
How to Remove the Front Headlight on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) This guide provides instructions to remove and replace the front headlight on a Ford Kuga in simple steps. First, open the bonnet of the vehicle and …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos