Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Deflectors on the Ford Kuga MK2

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side window

See other generations:
Video tutorial

In this video, you will see how to fit deflectors on the side window of the Ford Kuga MK2. Lower the window glass, clean the seals thoroughly with a cleaner, take the deflector for the rear window, and remove the protective backing from the adhesive strip on the edge of the deflector that will be inserted into the upper seal from the outside.

Using a spatula, insert two clips on the edge for better fastening.

Move on to the front window where you will repeat the same procedure, and finally, check that the opening and closing of the windows operate smoothly.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Wind Deflectors for Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) Learn how to install wind and rain deflectors on the Ford Kuga MK2. These deflectors are smoke-coloured to limit sun glare, and you can find them on …
How do you replace the timing belt of the Ford Kuga 2.0 TDCi?
How do you replace the timing belt of the Ford Kuga 2.0 TDCi?
Ford Kuga (2012-2019 / MK 2, C520) The executive procedure for replacing the timing belt of the Ford Kuga 2.0 TDCi is similar to many other cars, as it is mainly carried out from below…
How to Replace the Timing Belt on a Ford Kuga?
How to Replace the Timing Belt on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…

How to Enter the Unlock Code for the Radio in the Nissan Micra?

In this tutorial, you will see how to enter the unlock code for the radio in the Nissan Micra, a very simple operation to perform in case of memory loss after replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. First, turn on the instrument panel, then repeatedly press the "1" button until you reach the first digit of the code. Follow the same logic to enter the remaining 3 digits using the "2", "3", and "4" buttons, and confirm the entry with the up arrow button.

Watch the video!


by ScegliAuto

More videos