Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Battery

Today we will explain how to replace the battery of the Ford Kuga vehicle. To perform this operation independently, we need to open the front hood and immediately after, using a torque wrench, unscrew the screws on the battery bracket. Using a flathead screwdriver, disconnect the negative terminal clamp and immediately after the positive terminal clamp, then remove the battery from its compartment and proceed with the replacement. Insert the new battery and connect the positive terminal clamp first and then the negative terminal clamp; secure the battery by tightening the nut on the bracket and start the vehicle to test the new battery's functionality.

Posted on 9 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Ford Kuga?
How to Replace the Battery in a Ford Kuga?
Ford Kuga (2020-2026 / MK 3) To replace the battery in a Ford Kuga, open the rear tailgate to access the boot. Inside, lift the carpet to access the spare wheel, which must be re…
How to Replace the Battery in a Ford Kuga
How to Replace the Battery in a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) To replace the battery in a Ford Kuga, open the bonnet to access the components in the engine bay. The battery is located on the right side and can b…
Replacing the Battery in a Ford Kuga
Replacing the Battery in a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today, let's go through the instructions on how to remove and replace the battery in a Ford Kuga by following these simple steps. First, open the bon…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos