Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light bulb on a Ford Kuga

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

The instructions in this guide will allow us to disassemble and replace the rear headlight bulb of the Ford Kuga, in simple steps. First, we open the rear tailgate of the trunk and start removing the plastic cover found on the side of the luggage compartment; then disconnect the bulb holder along with the brake light, as shown in the video.

At this point, we install the new brake light bulb, of the correct type and with the same attachment; reassemble the bulb and replace any other bulbs in the rear headlight if necessary!


Posted on 14 August 2026 by ScegliAuto


Related tutorials

How to Remove the Third Brake Light on a Ford Kuga MK2
How to Remove the Third Brake Light on a Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) Today, we will see how to remove and replace the third brake light on a second-generation Ford Kuga in simple and quick steps. First, open the boot l…
How to Replace the Mirror Bulb on the Ford Kuga
How to Replace the Mirror Bulb on the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To replace the bulb in the external rear-view mirror of the Ford Kuga, lever under the glass of the mirror to extract it from the housing. Once the g…
How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos