Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How do you replace the mirror bulb on a Ford Kuga?

Ford Kuga - Video tutorial

Model: Ford Kuga MK 2, C520 - Years 2012-2019
Part: Light bulb
Operation: How do you replace the mirror bulb on a Ford Kuga?

In order to replace the Ford Kuga wing mirror bulb, you need to pry under the mirror glass, so that it can be extracted from inside its cap. Once the glass has been removed, it is possible to unscrew the screws which fix the taillight inside which the bulb is located. Therefore, by removing the taillight, it will be possible to disconnect the bulb from the connector, so that it can be replaced with a new one. After replacement, the bulb can be inserted into the taillight, fixing it and also reassembling the glass part.


Posted on 25 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the low beam light bulb on the Ford Kuga 2? Read Answer
    • Kuga 2008-2012 - Where are the sidelights on the Ford Kuga? Read Answer
    • Kuga 2012-2019 - How to replace the position light bulb on the Ford Kuga? Read Answer
    • Kuga 2012-2019 - How to change the sidelights in the Ford Kuga? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos