Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Indicator Bulb of the Ford Kuga 2 Wing Mirror

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Side marker bulb

In today's tutorial, you will learn how to remove and replace the indicator bulb of the external wing mirror of the second generation Ford Kuga. First, fully lower the glass of the external wing mirror using the controls on the door. Next, remove the indicator bulb from the bulb holder by pulling it out with a pair of thin pliers, as shown in the video. At this point, replace the old bulb with the new one, then reinsert the cable and bulb holder back into the indicator housing.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga External Mirror Indicator Bulb Replacement
Ford Kuga External Mirror Indicator Bulb Replacement
Ford Kuga (2012-2019 / C520, MK 2) Here’s how to remove and replace the indicator bulb of the external mirror of a second series Ford Kuga. To remove the bulb, you need to take off the…
Removing the Indicator Bulb from the Ford Kuga Wing Mirror
Removing the Indicator Bulb from the Ford Kuga Wing Mirror
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial, learn how to remove the indicator bulb from the side mirror of the Ford Kuga. First, remove the outer part of the mirror casing: yo…
How to replace the side turn signal bulb of the Ford Kuga
How to replace the side turn signal bulb of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will explain how to replace the turn signal bulb, located on the left side mirror of the Ford Kuga. We remove the glass, using a flat-head s…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos