Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on a Ford Kuga MK2

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Today, we will see how to remove and replace the third brake light on a second-generation Ford Kuga in simple and quick steps. First, open the boot lid and start by removing the plastic cover of the pillar, prying the sides with something thin.

Now use a flat screwdriver to remove the retaining clip of the third brake light, as illustrated in the video. At this point, you can remove the light from the outside by disconnecting the electrical connector; now you will be able to replace the bulbs or the entire light.

Apply the reverse procedure for reassembly!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to activate and deactivate the Start&Stop feature of the Ford Kuga
How to activate and deactivate the Start&Stop feature of the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) The instructions in this guide will allow us to activate and deactivate the Start&Stop system of the Ford Kuga, in simple steps. First, we get into t…
How to Disable the Start&Stop System on a 2016 Ford Kuga?
How to Disable the Start&Stop System on a 2016 Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) The Start&Stop system is automatically active in the 2016 Ford Kuga. However, the driver has the option to disable it at will, as shown in the video.…
How to replace the brake light bulb on a Ford Kuga
How to replace the brake light bulb on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) The instructions in this guide will allow us to disassemble and replace the rear headlight bulb of the Ford Kuga, in simple steps. First, we open the…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos