Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Start&Stop System on a 2016 Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Checks and maintenance

The Start&Stop system is automatically active in the 2016 Ford Kuga. However, the driver has the option to disable it at will, as shown in the video. As we see, you can temporarily switch off the system using the specific button installed in the centre of the dashboard, just below the radio. The same button is also used to reactivate it if needed. The Start&Stop system activates automatically every time the car is started and cannot be permanently disabled. Additionally, the vehicle requires a battery capable of supporting it.

Posted on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate and deactivate the Start&Stop feature of the Ford Kuga
How to activate and deactivate the Start&Stop feature of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The instructions in this guide will allow us to activate and deactivate the Start&Stop system of the Ford Kuga, in simple steps. First, we get into t…
How do you deactivate the Start&Stop feature of the Ford Kuga?
How do you deactivate the Start&Stop feature of the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To deactivate the Start&Stop system of the Ford Kuga, you need to insert the key into the corresponding slot: once it is inserted, you can turn it to…
How to Reset the Service Light in a 2019 Ford Kuga
How to Reset the Service Light in a 2019 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The procedure to reset the service light in a 2019 Ford Kuga requires specific steps. First, get into the vehicle and press the start/stop button to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos