Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the headlight of a Ford Fiesta

Model: Ford Fiesta MK III, MK 3 - Years 1989-1995
Part: Headlight

In today's video, we will see how to disassemble the front headlight of a third series Ford Fiesta. We start the procedure by opening the car's hood and disconnecting the bulb connector from the back of the headlight. Then, using an 8mm wrench, we remove the fixing screw above the headlight as shown in the video. Now the headlight is held in place by metal clips, so we carefully extract it from its housing by levering on the clips. Once done, we can remove the headlight from its housing and replace it with a new one following the reverse procedure.

Posted on 23 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the rear light on Fiesta
Removing the rear light on Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Do we want to replace the damaged headlight of a Ford Fiesta? Let's see the disassembly of the rear light. We open the tailgate of the car, we identi…
How to change the bulbs on the Ford Fiesta
How to change the bulbs on the Ford Fiesta
Ford Fiesta (2008-2017 / MK 6, Fiesta 6, MK VI) How to change the bulbs of the Ford Fiesta? Let's see the disassembly of the bulbs and the headlight. We lift the front hood of the car, unscrew the …
How to replace the front headlight of the Ford Fiesta
How to replace the front headlight of the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Today we will see the instructions that will allow us to disassemble and replace the front headlight of the Ford Fiesta. First, we open the hood of t…

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos