Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

Open the bonnet and place the support rod in position. Remove the round cover located at the back of the affected headlamp, then inside the bonnet. At this point, disconnect the main connector going to the headlamp and unscrew the screws that secure the headlamp to the rest of the car from the rear, also in the bonnet. Pull the headlamp out of its housing and remove it. Now that you have the headlamp in hand, position it on a workbench and replace any bulb present: they are all easily accessible and to remove them, simply unscrew them slightly and pull them out.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Indicator Bulbs on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the indicator bulbs mounted in the front headlamp of a Ford Fiesta. Here’s how to do it. Open the front bonnet by pulling the lever located…
How to Change Bulbs on Ford Fiesta
How to Change Bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the bulbs of the Ford Fiesta? Start by removing the bulbs and the front headlamp. Lift the front bonnet of the car, unscrew the securin…
Replacing the Front Headlight Bulb on the Ford Fiesta MK6
Replacing the Front Headlight Bulb on the Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, we will show you how to remove and replace the front headlight bulb on the sixth series Ford Fiesta in simple and quick steps. First, open and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos