Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front bumper of a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Front bumper

Today we will see how to remove the front bumper of a Ford Fiesta, a model produced from the year 2002 to the year 2008. So, let's start the operation immediately by opening the hood and removing the radiator grille, then we continue by unscrewing the three screws that hold the front headlights in place and removing them. After that, we unscrew the remaining screws that hold the headlight in place, located in the central part, under the wheel arches, and on the inner sides of the bumper as shown in the video, finally we disconnect the central fixing clips of the bumper and then remove it.

Posted on 28 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Front Bumper of a Ford Fiesta
How to Install the Front Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you install the front bumper of a Ford Fiesta? Let's see how to proceed, a task not too complex if done methodically. Take the bumper and posi…
Removing the Front Bumper from the Ford Fiesta
Removing the Front Bumper from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this brief and simple guide, learn how to remove and replace the front bumper of the Ford Fiesta by following the instructions below. First, open …
How to Fit a Front Bumper on Ford Fiesta
How to Fit a Front Bumper on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to fit a front bumper on Ford Fiesta? Follow these steps; it’s not too complex if done in order. First, grab the bumper and position it perfectly…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos