Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Bumper from the Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Front bumper

See other generations:
Video tutorial

How to remove the front bumper from the Ford Fiesta? Begin by lifting the front bonnet and unscrewing the screws from the front grille: remove it from above the bumper. Dismantle the front headlights to access the bumper.

Unscrew the fastening screws located at the top of the bumper. Once the screws at the top are removed, unscrew the screws located in the wheel arch liners (remove the clips at the bottom of the bumper).

Carefully pull the bumper away from the body of the vehicle; perform the necessary maintenance and fit the new bumper or reattach the same one that was removed earlier.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Learn how to remove the rear light of a Ford Fiesta. In this video, see how to dismantle the reflector light. Open the compartment under the light, s…
How to Remove the Rear Bumper on a Ford Fiesta
How to Remove the Rear Bumper on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the rear bumper on a Ford Fiesta? Follow these steps: this operation is not too complex if done methodically. Using a screwdriver or ba…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos