Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the rear bumper on a Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 4, MK IV, Be91, MK 4 - Years 1996-2002
Part: Rear bumper
Operation: How to remove the rear bumper on a Ford Fiesta

How to remove the rear bumper on a Ford Fiesta? Let's see how to proceed together: not too complex operation if you proceed in order, with a screwdriver or cordless screwdriver we unscrew the locking pins located in the upper part of the bumper. We unscrew the screws located in the lower part of the bumper, then remove the screws placed on the sides of the car's stone guards. Once the bumper is free from any screw or pin, let's take it with your hands and pull it away from the bodywork (disconnect any power cables). Finally we mount the new bumper following the disassembly steps.


Posted on 26 October 2023 by ScegliAuto



How to remove the rear bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we can begin, we will have to go and open the tailgate of our Ford Fiesta. So let's start by unscrewing and removing the fixing bolts present
Ford Fiesta rear bumper assembly
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this video tutorial we will see how to mount the rear bumper in a Ford Fiesta. First we go to put our bumper in position and we go to fit it corre
How to remove the diffuser in the rear bumper on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see in this video how to remove the fake diffuser in the rear bumper on Ford Fiesta: we lift the vehicle with a jack and put it in safety. With

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos