Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

In this tutorial, see how to remove the front bumper on a Ford Fiesta, a very simple and quick operation. First, unscrew the bolts located inside the wheel arch using both an 8mm spanner and a Torx T20. Next, remove the lower splash guard and proceed to take off the inner cover of the wheel arch.

Then, unscrew the additional bolt indicated, repeat the process on the opposite side, and remove the plastic rivets located along the top edge of the grille. At this point, you can separate the bumper from the chassis, position the replacement, and follow the reverse procedure.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Removing the Bumper from the Ford Fiesta
Removing the Bumper from the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the front bumper from the Ford Fiesta? Begin by lifting the front bonnet and unscrewing the screws from the front grille: remove it fro…
How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
Removing the Front Bumper from the Ford Fiesta
Removing the Front Bumper from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this brief and simple guide, learn how to remove and replace the front bumper of the Ford Fiesta by following the instructions below. First, open …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos