Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper from the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Front bumper

In this brief and simple guide, learn how to remove and replace the front bumper of the Ford Fiesta by following the instructions below. First, open the bonnet and start by removing the clips located at the top of the bumper; then detach the bumper from the bottom and unscrew the screws of the headlights, disconnecting the electrical connectors to remove them. Next, unclip the bumper from the sides by unscrewing the screws found on both sides of the front wheel arches; finally, remove the front bumper completely!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Bumper from the Ford Fiesta
Removing the Bumper from the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the front bumper from the Ford Fiesta? Begin by lifting the front bonnet and unscrewing the screws from the front grille: remove it fro…
Removing Front Bumper on Ford Fiesta
Removing Front Bumper on Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In today's tutorial video, you will learn how to remove the front bumper on an eighth-generation Ford Fiesta. First, lift the vehicle with axle stand…
Removing the Front Bumper of a Ford Fiesta
Removing the Front Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the bumper of your Fiesta damaged? Do you want to remove it? Here’s how to do it. Lift the front bonnet and secure it, then raise the car on a jac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos