Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Tourneo
    4. : How to fold down or remove the rear seats on Ford Tourneo Custom

Ford Tourneo - Video tutorial

Model: Ford Tourneo MK 2 - Years 2013-2023
Part: Seat
Operation: How to fold down or remove the rear seats on Ford Tourneo Custom

In today's video we will see how to remove or fold down the rear seats on a Ford Tourneo Custom, through various configurations that we will see below. First let's go to open the rear sliding doors; then we go to pull the levers of the backrests to recline them, and then lower the levers of the sofa to be able to raise it, as shown in the video. At this point we can pull it up, sliding it on the guides to remove it; we can therefore also change the position of the rear seats or remove it entirely. Let's reassemble them, instead, applying the reverse procedure!


Posted on 31 January 2024 by ScegliAuto



Removal and configuration of the rear seats on the Ford Tourneo Custom
Ford Tourneo (2013-2023 / MK 2) In this short and simple guide we will see how to configure and remove the rear seats on the Ford Tourneo Custom, following the instructions below. F
How to customize the seat positions of the Ford Tourneo Custom.
Ford Tourneo (2013-2023 / MK 2) Today's guide will show us the useful instructions for customizing the seat configuration of the Ford Tourneo Custom. The configuration of the rear s
How to remove and configure the rear seats of the Ford Tourneo Custom.
Ford Tourneo (2013-2023 / MK 2) Today's tutorial guide will show us how to disassemble and configure the rear seats of the Ford Tourneo Custom, following the instructions below. Fir

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos