Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

The first step is to release the headlamp by removing the two screws located on the top. Next, detach the retaining spring of the bulb holder by moving it to the left. Carefully remove the bulb holder, and to facilitate the operation, completely remove the retaining clip. Detach the bulb's retaining clip and remove it completely, taking care not to drop it. Remove the bulb from the bulb holder. Refit the new bulb into the bulb holder, ensuring it aligns with the reference notch for correct installation. Avoid touching the bulb with your hands. Carefully reattach the bulb's retaining clip and mount the assembly back into the headlamp, ensuring that the clips and seal are correctly in place.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Ford Fiesta
How to Replace the Front Headlight Bulb on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today, we will explain how to replace the front headlight bulb on a Ford Fiesta, switching from a standard bulb to an LED. No modifications to the co…
How to replace the front headlight bulb of the Ford Fiesta
How to replace the front headlight bulb of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the right front headlight bulb of the Ford Fiesta is a simple operation that can be done independently. To replace the bulb, we must: - ope…
How to replace the front headlight bulb of the Ford Fiesta 6
How to replace the front headlight bulb of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In the following guide, we will help you complete the procedure for replacing the front headlight bulb of your Ford Fiesta Mk6 correctly and safely. …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos