Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Fuse in the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Fuse box

First, locate the fuse box in the Ford Focus: simply look under the passenger glove compartment; once found, remove the screws securing it in place and gently pull it out. Consult the Ford manual to check the amperage of the fuses you intend to replace: in this case, the one for the windscreen washer pump is 20 amps. Ensure you purchase the correct fuse with the right amperage, perhaps taking the old one to the parts shop. Proceed with the replacement, reposition the fuse box, screw it back in place, and then check the correct functioning of the relevant feature. In this case, the issue with the water pump was something else, so further action will be needed; however, the standard procedure is as outlined.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Ignition Fuse on a Ford Focus?
Where is the Ignition Fuse on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) If the ignition button on the Ford Focus is not functioning, it is necessary to replace the fuse. The fuse related to its operation is located inside…
Fuse Diagram and Location for the Ford Focus
Fuse Diagram and Location for the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's guide will show you the diagram and layout of the fuses for the Ford Focus. First, locate the external fuse box, situated in the engine compa…
Where is the central locking fuse located in the Ford Focus?
Where is the central locking fuse located in the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the central locking fuse in the Ford Focus, first locate the relevant fuse box: it is positioned below the glove compartment on the passen…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos