Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Glove Compartment

Model: Ford Focus MK 3 - Years 2011-2018
Part: Glove compartment

Removing the glove compartment is relatively simple and does not require special tools; it comes off complete with the door. It is secured to the dashboard with five Torx screws: one is located on the side, hidden by the triangular dashboard cover, which must be removed to access the screw (the cover is secured with pressure clips, and it is recommended to remove the door seal to take it off). Two more screws are located along the top edge of the door closure, and the last two at the bottom of the scuff plate; to reach these last ones, remove the sound-absorbing cover. Once all screws are removed, you can extract the glove compartment.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dashboard Disassembly Instructions
Dashboard Disassembly Instructions
Ford Focus (1998-2004 / MK 1) Disassembling the dashboard is a time-consuming task that requires a lot of patience since there are many components to remove in a specific sequence…
iPhone iPod Charging Mount
iPhone iPod Charging Mount
Ford Focus (1998-2004 / MK 1) You can purchase an aftermarket mount for charging the iPhone to fit in the glove compartment on the centre console, to the left of the radio. Instal…
Removal of Central Tunnel Cover
Removal of Central Tunnel Cover
Ford Focus (1998-2004 / MK 1) Removing the central tunnel cover is very simple and does not require special tools; start by removing the small storage compartment at the rear, pul…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos