Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

How to remove the glove compartment on a Ford Focus? Follow these steps: use a plastic lever to detach the trim on the right side of the dashboard. Open the glove compartment and unclip the end stop arms (if present), then unscrew the securing screws with a screwdriver (located on the sides). After completing the previous steps: unclip the side plastic clips of the glove compartment and pull it out from the dashboard, disconnect any power cables, and remove the glove compartment from the dashboard. Reassemble all components of the glove compartment as you disassembled them earlier. Check the correct fitting of the parts.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Glove Box on a Ford Focus
Removing the Glove Box on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the glove box in your car's dashboard? Here’s how to disassemble the glove box on a Ford Focus. Open the glove compartment and locate …
Removing Heating Fan from Ford Focus
Removing Heating Fan from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the heating cabin fan from a Ford Focus. First, remove the glove compartment: unclip the levers …
Remove the Cabin Fan from the Focus
Remove the Cabin Fan from the Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Learn how to remove the cabin fan from inside the dashboard of the Ford Focus. Open the glove compartment and detach the glove box from inside the da…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos