Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Cabin Fan Resistor on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Blower motor

Removing the cabin fan on a Ford Focus? Remove the glove compartment to access the part to be removed. Take out the glove compartment located in the dashboard, and using a screwdriver, unscrew the cover where the resistor is located. Disconnect the large connector of the resistor, then extract it from the cabin. Insert a new fan resistor (connect the power connector). Refit the cover and the glove compartment. Check the correct installation of the fitted parts. At the end of the installation, check if the fan works.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
Removing the Fan Resistor on a Ford Focus
Removing the Fan Resistor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Let's look at removing the ventilation fan resistor on a Ford Focus. Use a lever to remove the plastic trim inside the front dashboard (glove compart…
Replace the Cabin Fan Resistor on the Ford Focus MK3
Replace the Cabin Fan Resistor on the Ford Focus MK3
Ford Focus (2011-2018 / MK 3) This guide provides the main instructions to dismantle and replace the cabin fan resistor on the third series Ford Focus in simple and quick steps. F…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2011-2018 - Why is the fan of the Ford Focus not working? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos