Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Blower motor

How to replace the fan resistor on a Ford Focus? Follow this guide for disassembly. Remove the drawer located in the front dashboard using a lever (unscrew the screws), then unscrew the cover where the resistor is located with a screwdriver. Disconnect the large connector from the resistor, then extract it from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct installation of the previously fitted parts and test their proper functioning.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fan Resistor on a Focus
How to Change the Fan Resistor on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Change the climate control fan resistor on a Focus? Open the door and begin removing the plastic cover under the centre tunnel (pedal side). Use a sc…
How to Remove the Cabin Fan Resistor on Ford Focus
How to Remove the Cabin Fan Resistor on Ford Focus
Ford Focus (1998-2004 / MK 1) To remove the cabin fan resistor, let's see how to do it from inside the dashboard. Open the glove compartment and detach it from inside the dashboar…
How to Replace the Cabin Fan Resistor on a Ford Focus
How to Replace the Cabin Fan Resistor on a Ford Focus
Ford Focus (1998-2004 / MK 1) If the cabin fan does not activate except at position 4 when adjusting the speed control, it's likely that the resistor regulating the fan speed has …

    Frequently Asked Questions

    • Focus 2011-2018 - Why is the fan of the Ford Focus not working? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos