Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan Resistor on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Blower motor

To remove the cabin fan resistor, let's see how to do it from inside the dashboard. Open the glove compartment and detach it from inside the dashboard (lower it down), then unscrew the securing screws of the covering plastics to access the resistor. Pull the fan resistor out from inside the dashboard as shown in the video. Insert the new part and reassemble all the components of the glove compartment as you disassembled them earlier. Turn on the ignition and test the air fan.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
Removing Cabin Fan Resistor on Ford Focus
Removing Cabin Fan Resistor on Ford Focus
Ford Focus (1998-2004 / MK 1) Removing the cabin fan on a Ford Focus? Remove the glove compartment to access the part to be removed. Take out the glove compartment located in the …
How to Change the Fan Resistor on a Focus
How to Change the Fan Resistor on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Change the climate control fan resistor on a Focus? Open the door and begin removing the plastic cover under the centre tunnel (pedal side). Use a sc…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2011-2018 - Why is the fan of the Ford Focus not working? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos