Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011

Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger side and begin by removing the glove compartment to access the cabin fan located at the back. Then, disconnect the electrical connector of the fan resistor to remove it, as shown in the video. Now, install the new resistor and check the fan operation at various speeds; finally, reassemble the glove compartment!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Cabin Fan from the Ford Focus
Guide to Removing the Cabin Fan from the Ford Focus
Ford Focus (1998-2004 / MK 1) This guide will show you the main steps to remove and replace the cabin fan of the Ford Focus. First, get inside the vehicle on the front passenger s…
Removing the Cabin Fan on Ford Focus
Removing the Cabin Fan on Ford Focus
Ford Focus (2011-2018 / MK 3) Learn how to remove the cabin fan on a Ford Focus. The cabin ventilation fan is located directly under the dashboard. Unscrew the securing screws on …
Guide to disassembling the cabin fan of the Ford Focus
Guide to disassembling the cabin fan of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's instructions will show us how to disassemble and replace the cabin fan motor of the Ford Focus. First, we get on board the cabin and start di…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos