Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Cabin Fan Resistor on the Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018

This guide provides the main instructions to dismantle and replace the cabin fan resistor on the third series Ford Focus in simple and quick steps. First, get into the driver's seat and locate the fan resistor next to the accelerator pedal; then, unscrew the screws with a Torx screwdriver and disconnect the electrical connector to remove it. At this point, you can replace it with the new one; simply reassemble everything by following the reverse procedure!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
How to Replace the Fan Resistor on a Ford Focus
How to Replace the Fan Resistor on a Ford Focus
Ford Focus (1998-2004 / MK 1) How to replace the fan resistor on a Ford Focus? Follow this guide for disassembly. Remove the drawer located in the front dashboard using a lever (u…
Removing the Fan Resistor on a Ford Focus
Removing the Fan Resistor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Let's look at removing the ventilation fan resistor on a Ford Focus. Use a lever to remove the plastic trim inside the front dashboard (glove compart…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos