Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Air filter

To maintain the health and performance of the Ford Transit, it is essential to regularly service the air filter and replace it if it shows excessive wear. To perform this operation, pay attention to the instructions in this mini guide. Before proceeding, ensure the engine is turned off and has cooled sufficiently. Then, fully lift the bonnet and focus on the left side. Next, disconnect the small rubber hose connected to the air filter box and remove the cover from it. Finally, replace the old air filter with the new one and reconnect the hose you previously removed.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in the Ford Transit
How to Replace the Air Filter in the Ford Transit
Ford Transit (2006-2014 / MK 7) In today's video, learn how to replace the air filter in the Ford Transit. First, open the front bonnet by pulling the lever located inside the vehic…
How to Replace the Air Filter on the Ford Transit MK7
How to Replace the Air Filter on the Ford Transit MK7
Ford Transit (2006-2014 / MK 7) .. Today, you will learn how to replace the air filter on the Ford Transit. To remove the air filter, open the front bonnet and.. …
How to Replace the Cabin Air Filter on the Ford Transit
How to Replace the Cabin Air Filter on the Ford Transit
Ford Transit (2006-2014 / MK 7) Today, you will learn how to replace the cabin air filter on the Ford Transit van, model MK7. The cabin air filter is located inside the front bonnet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos