Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Enable the Tyre Learning Function on the Ford Transit Van

Model: Ford Transit MK 8 - Years 2014-2024
Part:

On the 2015 Ford Transit Van, the TPMS (Tyre Pressure Monitoring System) relearning procedure is very simple and does not require diagnostic tools. Sit in the driver's seat and turn on the dashboard. Next, activate the hazard lights for three complete cycles (turn them on and off three times consecutively). After the third cycle, the system will automatically enter 'learning' mode, indicated by a flashing TPMS light or a message on the display. Once in this mode, you can proceed with calibrating the sensors, following the vehicle's instructions and inflating or deflating each tyre as necessary.

Posted on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Ford Transit Custom Van?
How to Reset the Tyre Warning Light on the Ford Transit Custom Van?
Ford Transit (2012-2024 / Custom) In this tutorial, you will see how to reset the tyre warning light on the Ford Transit Custom van, a very simple and quick operation to perform only …
How to Program the Key Remote of the Ford Transit
How to Program the Key Remote of the Ford Transit
Ford Transit (2014-2024 / MK 8) Follow the instructions below to program the key remote of the Ford Transit. First, get inside the vehicle and take the original key; then, fasten yo…
How to Position the Jack in a Ford Transit Van?
How to Position the Jack in a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will learn how to position the jack in a Ford Transit van, useful for example when you need to replace a flat tyre. Following t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos