Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 7
- Years 2006-2014 If it happens that the engine stalls due to a piston seizure, it is necessary to regenerate the entire engine: this is an intervention that requires a lot of experience since the engine must be completely disassembled in all its parts and subsequently assembled after the appropriate rectification interventions; it will in fact be necessary to grind the cylinders to remove the scratches caused by seizure and, since everything is disassembled, it is advisable to have the cylinder head regenerated with valve seat grinding and relative replacement of the rubber pads and various oil seals. During the assembly phase, it is also suggested to replace the bushings, the piston rings, all the gaskets, the timing chain and, if necessary, also the clutch.
Posted on 13 August 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |